Are you an End User?
Products > Smart Home > Kit > Radio switch kit for light control or automation, Radio Power system
PDF Product SheetPrint

Radio switch kit for light control or automation, Radio Power system

5454520

Radio switch kit for light control or automation, Radio Power system
Radio switch kit for light control or automation, Radio Power system

Radio switch kit for light control or automation, Radio Power system

5454520

  • Product specification:
  • MTR2000ERP
  • ✦
    Network voltage 230 V~ (± 15%) - 50 Hz
  • ✦
    Power: on resistive load 10 A - 250 VAC, max. 2500 VA; other loads 10 A - 30 VDC max 300W
  • ✦
    Power consumption < 1 VA - < 0.3W
  • ✦
    Room temperature - 20 °C + 60 °C
  • ✦
    Sound level < 60 dB at 20 cm
  • ✦
    Relative humidity 0 to 70%
  • ✦
    Range: in the same room < 100 sq.m; 250 m in free field of view without obstacles (Radio range is reduced by metal items, walls or partitions.)
  • ✦
    Frequency: 2.4 GHz
  • ✦
    Transmission: Bidirectional with notification LED on transmitter (If the LED is not blinking this does not indicate a battery fault, but a failed radio transmission). It stores the data in case of power failure.

  • TLM1T45P
  • ✦
    Range: within the same room < 100 sq.m; 250 m in free field without obstacles (range is reduced by metal items, walls or partitions)
  • ✦
    Frequency: 2.4 GHz
  • ✦
    Transmission: Two-way with notification LED on transmitter. (If the LED is not blinking this does not indicate a battery fault, but a failed radio transmission)
  • ✦
    Battery: lithium CR2032 type
  • ✦
    Average battery duration: 5 years (The battery can be replaced by opening the case with a flat-head screwdriver). Data are retained.
  • ✦
    Max. no. of receivers per channel: 4 in direct mode; unlimited in “radio bus” mode
  • ✦
    Operating temperature -10°C +50°C
  • ✦
    IP54 protection
  • ✦
    Relative humidity max. 70%

The radio switch kit allows the control of a lighting point in diverter mode: when connected to the MTR2000ERP toggle relay, the 1-channel transmitter allows the same lighting point to be switched on/off.
Thanks to the radio transmission of the modules in the kit, no changes to the electrical system or masonry work are required.
The kit includes:
- no. 1 item no. 5454462 - Flush-mounted 2000W timed electronic toggle relay module for Radio Power system, with neutral wire
- no. 1 item no. 5454417 - Wall-mounted 1-channel TLM1T45P remote control for Radio Power system

Product Booklets

Installation

INSTALLATION MANUAL (remote) - it,en,fr,es,de,nl,da

DS1054-062B • pdf 1.24 MB • ID: 609501

INSTALLATION MANUAL (relay module) - it,en,fr,es,de,nl,da

DS1054-012H • pdf 1.18 MB • ID: 609444

Programming

RADIO QUICK INSTALLATION GUIDE - en

DS1054-102A • pdf 5.03 MB • ID: 490628

  • ✦
    Packaging quantity single: 1
  • ✦
    EAN single: 3760054545205
  • ✦
    Base: 0 mm
  • ✦
    Height: 0 mm
  • ✦
    Depth: 0 mm