WLP DIN rail mount 2000W timed relay with external aerial

The MTR2000MRPX DIN rail radio module is a timed step-by-step electronic relay with external antenna, which allows the management of lights or automations up to a maximum of 2000W.
The version with external antenna allows you to move the signal to bypass radio obstacles (stone walls, metal walls, etc.).
Thanks to its potential-free contact, it can control any device up to 2000W (eg light, aspirator, irrigation ...) that requires a clean contact.
The behavior of the relay can be customized, among the following: impulse mode (e.g. electric lock), monostable mode (e.g. bell), flashing light mode (application for the deaf and hard of hearing) or staircase lights timer mode.
It includes double timings: a main one from 2 seconds to 4 hours, with switch-off warning, and a prolonged one (12 hours).
The MTR2000MRPX module is hybrid, and therefore can be controlled by wire, either by means of a button or switch connected directly, and in radio mode, by Yokis transmitters.
Similarly, it is possible to centralize multiple MTR2000MRPX modules to allow total switching on or off, both via the pilot wire and via the Yokis Radio Bus.
If the system includes the Yokis Hub, the module can also be managed via the YnO App, both locally and remotely, and can be managed in automatic mode by defining scenarios.
Programming the module is very simple: either through a directly connected button or through the YokisPRO Installer application.
Accessories:
R12M (code 5454073): Interface for double button (not interlocked).
D600V (code 5454072): diode for centralizing the modules via pilot wire.
RAL60 (code 5454083): extension 60 cm for external antenna.
RAL200 (code 5454084): 200 cm extension for external antenna.
SUP01 (code 5454085): antenna support for horizontal or vertical mounting.