DIN rail time-controlled 500W electronic toggle relay module for wired system, without neutral wire

The MTR500M DIN rail module is a timed wire step-by-step electronic relay, which allows the management of lights or automations up to a maximum of 500W.
It includes double timings: a main one from 2 seconds to 4 hours and a prolonged one (1 hour), with switch-off warning.
it is possible to centralize the management of several MTR500Ms via the pilot wire, using the CVI50 accessory (code 5454805).
Thanks to the “soft start / soft stop” function, it limits the inrush current during the lighting phase of the light circuit, thus increasing the life of the lamp and the buttons.
The module provides 2 types of integrated electronic protections: in case of short circuit on the load (with automatic reset after elimination of the fault) and against overheating. it is also immune to network disturbances up to 1.5 kV.
It also allows control via a low voltage button (12 or 48 V), both in direct and alternating, with the addition of the ADBT accessory.
Accessories:
ADBT (code 5454076): 12-48V AC or DC low voltage adapter
D600V (code 5454072): Diode for centralizing the modules via pilot wire
BV40 (code 5454071): Electronic coil. Allows the use of modules of the 500 range with pushbuttons with indicator light
CVI50 (code 5454805): Allows centralization of modules of the 500 range